Kit Contains:
- 1 x Airbrush
- 1 x Spare Nozzle
- 1 x Eyedropper
- 5 x Cleaning Brushes
- 5 x Cleaning Needles
- 1 x Air Compressor
- 1 x Metal Cup (5ml)
- 2 x Plastic Cups (15 & 35ml)
- 1 x USB Charging Cable
- 1 x Instruction Manual
Directions For Use:
- Assemble the Airbrush, Liquid Cup and Air Compressor correctly (as shown in the product overview).
- Mix your preferred liquid pigment with the relevant developer in a suitable dish. Once fully mixed, fill the Liquid Cup with the solution.
- Use the Output Gear to adjust the rate of flow.
- Press the button on the Air Compressor to toggle between the different air pressure modes.
- Press the Trigger back to start spraying.
NOTE: Liquid pigment must be mixed with the developer before pouring into the Liquid Cup, otherwise it may block the Nozzle.
Charging Instructions:
Plug the USB Type-C end of the USB Charging Cable into the charging port on the Air Compressor, and the other end into a power adapter or computer. It is recommended to use a 5V/1A adapter, computer or power bank.
It normally takes 1.5-2.5 hours to fully charge.
Maintenance:
NOTE: During step 3, keep the Trigger pressed to prevent components from getting damaged.
- Unscrew the housing to reveal the inside.
- Spin out the needle nut.
- Pull out the long built-in needle.
- Wipe it with a clean cloth.
After cleaning, ensure that all the parts are air dried naturally, then carefully reassemble.
Specifications:
Battery Working Time: 50-75 minutes
Air Pressure Modes: 23, 28 & 32psi
Charging Time: 1.5-2.5 hours
Atomisation Flow: 0.012mm (approx)
Nozzle Size: 0.3mm
Charging Method: Standard USB Charging
Battery Capacity: 1400 mA
Power: 8W
Input Voltage: 5V/1A
Liquid Cup Capacity: 5, 15 & 35ml
There are no reviews yet. Be the first to review.
Write a review